UGA Georgia Bulldogs Dawgs College Football Hitch Cover 2 Inch Receiver G

3D printed Georgia Ga Bulldog Tow Hitch Cover - Hitch Insert for 2" Tow Receivers - G

Go Dawgs

Updated three-position receiver insert

The receiver insert has three overlapping pin positions on both sides, with clearance between positions for a nominal 5/8-inch (15.875 mm) hitch pin. Pin centers are 60, 70 and 80 mm behind the back of the front plate; the relieved opening allows adjustment across that 60-80 mm range. The insert is 100 mm long and approximately 50.59 mm square.

Designed for compatible 2-inch square hitch receivers. Check your receiver opening, usable insertion depth and pin-hole setback before ordering; receiver dimensions, coatings and corner radii vary. These positions do not guarantee fit on every vehicle. Secure the cover with your own suitable hitch pin and retaining clip. Decorative hitch cover; no towing or load-carrying capacity.

Gallery images are AI product visualizations of the revised design. The front artwork and colors are unchanged. Fine 3D-print layer lines and small surface variations are normal. This standard cover has no tracker compartment.

This decorative trailer hitch cover plug serves as a receiver cover and receiver plug for your hitch opening. Also called a hitch cap, trailer hitch cap, tow hitch cover, or trailer tube plug, it fits only the receiver size and mounting dimensions specified in this listing. Decorative accessory only; remove before towing.