Nebraska Cornhuskers Huskers Trailer Hitch Cover 2 Inch Receiver
Nebraska Cornhuskers Huskers Trailer Hitch Cover 2 Inch Receiver
3D printed Nebraska Cornhuskers Tow Hitch Cover - Hitch Insert for 2" Tow Receivers
Main image is an AI product mockup.
On Sep 10, 2026 at 12:29:09 PDT, seller added the following information:
Updated three-position receiver insert
The receiver insert has three overlapping pin positions on both sides, with clearance between positions for a nominal 5/8-inch (15.875 mm) hitch pin. Pin centers are 60, 70 and 80 mm behind the back of the front plate; the relieved opening allows adjustment across that 60-80 mm range. The insert is 100 mm long and approximately 50.59 mm square.
Designed for compatible 2-inch square hitch receivers. Check your receiver opening, usable insertion depth and pin-hole setback before ordering; receiver dimensions, coatings and corner radii vary. These positions do not guarantee fit on every vehicle. Secure the cover with your own suitable hitch pin and retaining clip. Decorative hitch cover; no towing or load-carrying capacity.
Gallery images are AI product visualizations of the revised design. The front artwork and colors are unchanged. Fine 3D-print layer lines and small surface variations are normal. This standard cover has no tracker compartment.
This decorative trailer hitch cover adds a finished look to an unused receiver opening. Also called a tow hitch cover or tow cover, it is a cosmetic accessory, not load-bearing towing equipment. Check the listed receiver size, mounting details and fit notes before ordering.