Halloween Bat Spiderweb Door Trim Hangers Pair Black 7 Inch Corner Decor

Bat and Web seasonal door trim hangers

A small Halloween detail with a big seasonal look: mirrored spiderweb corners with upright bats, finished in matte black. The built-in L-shaped support rests on top of the stationary door trim while the artwork comes down in front.

Simple seasonal placement

1. Set the short horizontal support on a flat, accessible top trim ledge, with the artwork facing into the room and hanging downward.
2. Check that the decoration rests securely and stays clear of the moving door. The rearward support is 15 mm deep; rounded or sloped trim may not support it.
3. If additional retention is needed, use a small suitable removable decor tab or putty on a solid rear area, following its maker's surface and removal instructions. Adhesive is not included.

No screw holes or drilling. Lift the pieces off when the season is over; if using adhesive, release it first as directed. Store without bending or crushing the top support or thin artwork.

What you receive

One pair: two separate black PLA plastic decorations with integral 90-degree top supports. Each is approximately 180 mm wide x 180 mm high x 18.2 mm overall depth (7.1 x 7.1 x 0.72 inches). The decorative face is 3.2 mm thick. This is a physical made-to-order pair, not a digital download.

3D printed in Georgia, USA, with visible fine print-layer texture. Five-business-day handling before shipment. For indoor decorative use. This hangs from fixed trim, not over a moving door slab; not a universal-fit clip. Wipe gently, avoid heat and open flame, and do not bend delicate details. Adhesive may affect delicate paint or finishes.

Decorations only. Adhesive, screws, hardware, lights, model, door casing and room accessories are not included. Listing images are product presentation renderings and CAD views; printed texture and small surface details may vary.